905：Error limit switch monitoring限位開關監控錯誤。上海仰光電子科技有限公司專業從事各品牌伺服驅動器維修,伺服電機維修,觸摸屏維修,變頻器維修,伺服器維修,伺服控制器維修,數控系統維修改造，機器人維修保養以及各種板卡,芯片級維修維護,免費檢測,快速維修,部分立等可取!

This error occurs under the following conditions: 此錯誤發生在以下情況下：

Case a: Both hardware limit switches set simultaneously.

情況a：兩個硬件限位開關同時設置。

Case b: Positiver software limit switch and negative hardware limit switch active simultaneously.

情況b：正極軟件限位開關和負極硬件限位開關同時激活。

Case c: Negative software limit switch and positive hardware limit switch active simultaneously.

情況c：負軟件限位開關和正硬件限位開關同時激活。

Possible causes: 可能的原因：

- Software limit switch set incorrectly, such as values for positive and

negative limit switches are reversed.

軟件限位開關設置不正確，例如正值和反向限位開關。

- Hardware limit switches are wired incorrectly.

硬件限位開關接線錯誤。

- Errors on the cable for hardware limit switches.

硬件限位開關的電纜出現錯誤。

鮑米勒驅動BUM25-30/60-30-0001 鮑米勒BAUMULLER伺服驅動器維修，

鮑米勒DF30K-IEC71-DS 56-B2維修，

Baumuller鮑米勒伺服驅動器BUM618-12/18-31-R-0010-C010-SM維修，

鮑米勒伺服驅動器 BM4423-St1-01242-0311-7012維修，

鮑米勒 BUS21L-7.5/15-31-224 BUG2-60-31-B-209維修，